Instrumentation
Flow System - Fitting Pack
The fitting pack includes:
- Fitting nuts (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
- Ferrules PTFE/SS (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
Flow System - Fitting Pack
Contents: Fitting nuts + ferrules
Details: Other pack options are available under request.
FIT-PACK
Flow System - Basic Pack
The basic pack includes:
- Fitting nuts (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
- Ferrules PTFE/SS (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
- PTFE tubing (OD: 1,6mm - 1/16" - ID: 0,8 mm) - 1 m
- Plastic syringes (10 mL) - 5 units
- Disposable scalpel - 1 unit
Flow System - Basic Pack
Contents: Fitting nuts + ferrules + tubing + syringes + scalpel
Details: Other pack options are available under request.
B-PACK
Flow System - Basic-Plus Pack
The plus-pack includes:
- Fitting nuts (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
- Ferrules PTFE/SS (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
- PTFE tubing (OD: 1,6mm - 1/16" - ID: 0,8 mm) - 1 m
- Glass reservoir (GL32 thread - 50 mL) with standard cap - 2 units
- Bottle cap (GL32 thread/ 2 x Luer ports) - 2 units
- Plastic syringes (10 mL) - 5 units
- Disposable scalpel - 1 unit
Flow System - Basic-Plus Pack
Contents: Fitting nuts + ferrules + tubing + reservoirs + syringes + scalpel
Details: Other pack options are available under request.
B-PACK+
Flow System - Full Pack
The full-pack contains all the accesories for using using MicruX’ thin-film (micro)electrodes in flow systems with All-in-One platform. This pack includes:
- AIO-CELL-1x + 25 standard electrodes.
- Peristaltic pump and injection valve.
- Fittings, ferrules and tubing.
- Glass reservoir and other material.
Flow System - Full Pack
Contents: AIO Cell + 1 Add-on + 25 standard thin-film electrodes + fitting system + reservoir + other accessories
Details: Other pack options; with different peristaltic or syringe pumps, accessories…, are also available on demand. Packs might be customized taking into account the specific requirements of customers.
F-PACK-AIO
ECSens Cable Adaptor
Cable adaptor with 2-mm male banana plug (+ alligator clips) for using in combination with MicruX® ECSens® to connect any kind of electrodes with this miniature potentiostat.
ECSens Cable Adaptor
Dimensions: 50 cm long
Contents: 1 x Cable adaptor (male end) + 4 x alligator clips
Details: Accessory for MicruX® ECSens® electrochemical sensing interface
ECSENS-CAB2M
CABLE connector for thick-film electrodes
SPE-CABLE connector provides an interface between the printed electrodes and the potentiostat, enabling the use of microvolume (20 – 50 μL sample drops) or dipping into a solution.
CABLE connector for thick-film electrodes
Dimensions: 50 cm long
Contents: 1 x SPE cable (with 2-mm male or female ends to be selected)
Details: Accessory for thick-film electrodes
ED-SPE-CABLE
BOX connector for thick-film electrodes
SPE-BOX connector provides an interface between the screen-printed electrodes and any kind of potentiostat, enabling the use of microvolume (20 – 50 μL sample drops).
BOX connector for thick-film electrodes
Dimensions: 58 x 40 x 15 mm (L x W x H)
Contents: 1 x BOX interface (with 2-mm female terminals)
Details: Accessory for thick-film electrodes
ED-SPE-BOX
CABLE connector for thin-film electrodes
TF-CABLE connector provides a universal interface between all standard MicruX' thin-film electrodes (up to four contact pads) and the potentiostat, enabling the use of microvolume (2 – 10 µL sample drops) or dipping into a solution.
CABLE connector for thin-film electrodes
Dimensions: 50 cm long
Contents: 1 x TF cable (with 2-mm male or female ends to be selected)
Details: Accessory for MicruX' thin-film electrodes
ED-TF-CABLE
CABLE connector for thin-film IDE electrodes
IDE-CABLE connector provides an interface between the thin-film IDµElectrodes (IDE - two contact pads) and the potentiostat, enabling the use of microvolume (2 – 10 µL sample drops) or dipping into a solution.
CABLE connector for thin-film IDE electrodes
Dimensions: 50 cm long
Contents: 1 x IDE cable (with 2-mm male or female ends to be selected)
Details: Accessory for thin-film InterDigitated Electrodes (IDE)
ED-IDE-CABLE
Bipotentiostat Cable
Bipotentiostat cable with 2-mm male banana plug (+ alligator clips) for using in combination with MicruX® ECStat to connect the electrodes of detection system.
Bipotentiostat Cable
Dimensions: 100 cm long
Contents: 1 x Bipot cable (male end) + 4 x alligator clips
Details: Accessory for MicruX® ECStat electrochemical workstation
ECSTAT-CAB2M
Bipotentiostat USB-Cable
Bipotentiostat cable with miniUSB plug for using in combination with MicruX® ECStat to directly connect the MicruX’ electrochemical platforms with thin-film electrodes.
Bipotentiostat USB-Cable
Dimensions: 50 cm long
Contents: 1 x Bipot cable (miniUSB end)
Details: Accessory for MicruX® ECStat electrochemical workstation and MicruX' electrochemical platforms
ECSTAT-USB
Standalone Desktop LCD Digital Microscope
Up to 1200x magnified and LED Illuminated viewing. Perfect complement for a wide range of applications such as inspection of electronics, microfluidic channels, electrodes, etc. Compatible with PC, MAC and iPad.
Standalone Desktop LCD Digital Microscope
Dimensions: 22.9 x 15.2 x 15.2 cm
Image sensor: 5 MegaPixel (up to 12M by interpolation)
Focus range: Manual focus from 10mm to 30mm
Light source: 8 LEDS with adjustable brightness
Digital magnification: Up to 1200x
Optical magnification: 10x to 300x
Battery power: Rechargeable 1050 mAh Li-ion Battery
Working time: 2 hours
Charge time: 3 hours
Software compatibility: Windows XP SP2/Vista/7/8/10 and Mac 10.6-10.8
Video format: AVI
Video capture resolution: VGA, QVGA - 30 fps
Software languages: English, German, French, Spanish, Russian, Italian, Portuguese, Dutch, Polish, Japanese, Korean, Chinese
On screen display languages: English, German, French, Spanish, Italian, Portuguese, Dutch, Japanese, Chinese Simplified, Chinese Traditional
LCD screen: 3.5" LCD screen, 4:3 ratio, resolution 320x240 pixels
microSD card capacity: Up to 32GB microSDHC
TV output: Yes
Weight: 0.9 Kg
Certificates: CE, FCC approval, RoHS compliance
Controller: High speed DSP
Flicker rate: 50Hz/60Hz
SDM-1200x-LCD
iHVStat Electrophoresis System
Integrated, automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.
iHVStat Electrophoresis System
Dimensions: 165 x 150 x 95 mm (L x W x H)
Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)
LED indicators: power, Bluetooth, cable
Battery power: LiPo - 3300 mAh
HV channels/outputs: 1/4
HV outputs polarity: Positive / negative
HV Output Voltage: ± 3000 V
HV Max. Output Current: 0.34 mA
DC-potential range: ± 2.00 V
DC-potential resolution: 1 mV
DC-offset error: ± 1 mV
Accuracy: < 0.1%
Current ranges: 1 nA to 1 μA (4 ranges)
Maximun DC current: ± 2 μA
Weight: < 0.5 Kg
Certificates: CE
Details: PC software control - MicruX Manager. Integrated interface for microfluidic chip holder. Cabeless.
iHVSTAT
HVStat Electrophoresis System
Automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.
HVStat Electrophoresis System
Dimensions: 165 x 150 x 85 mm (L x W x H)
Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)
LED indicators: power, Bluetooth, cable
Battery power: LiPo - 3300 mAh
HV channels/outputs: 1/4
HV outputs polarity: Positive / negative
HV Output Voltage: ± 3000 V
HV Max. Output Current: 0.34 mA
DC-potential range: ± 2.00 V
DC-potential resolution: 1 mV
DC-offset error: ± 1 mV
Accuracy: < 0.1%
Current ranges: 1 nA to 1 μA (4 ranges)
Maximun DC current: ± 2 μA
Weight: < 0.5 Kg
Certificates: CE
Details: PC software control - MicruX Manager. External cables for interfacing microfluidic chip holder.
HVSTAT
NE-300 Just Infusion Syringe Pump
NE-300 offers the most basic pumping system at a very affordable price. Infusion only, does not withdraw, volume target, nor have computer interface or programmability.
NE-300 Just Infusion Syringe Pump
Dimensions: 229 x 146 x 114 mm (D x W x H)
Working mode: Infusion
Channels: 1
Motor type: Step motor
Motor step per revolution: 400
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.2126 µm to 0.8504 µm depending on motor speed
Maximum speed: 38 mm/min
Minimum speed: 0.7 µm/min
Linear force: > 150 N at minimum speed, 80 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 12 nL/min - 20 mL/min
Syringe size: 1 - 60 mL (140 mL partially filled)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 1.63 Kg
Certificates: CE
NE-300
NE-1000 Full Featured Standalone Single-Syringe Pump
NE-1000 family offers a fully programmable syringe pump with infusion and withdrawal mode. It holds one syringe from 1 to 60 mL with infusion rates from 0.01 µL/min to 30 mL/min.
NE-1000 Full Featured Standalone Single-Syringe Pump
Dimensions: 229 x 146 x 114 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: 1
Motor type: Step motor
Motor step per revolution: 400
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.2126 µm to 0.8504 µm depending on motor speed
Maximum speed: 51 mm/min
Minimum speed: 0.7 µm/min
Linear force: > 150 N at minimum speed, 80 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 12 nL/min - 30 mL/min
Syringe size: 1 - 60 mL (140 mL partially filled)
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 1.63 Kg
Certificates: CE
Details: Lower (NE-1002X) and higher (NE-1010) flow rate models are available. Other Features: • Built for Automation. • Operates stand-alone or from a computer. • Easy-to-use keypad interface. • Applications range from simple infusions to complex pumping progra
NE-1000
NE-1002X Programmable Microfluidics Single-Syringe Pump
NE-1002X is a fully programmable syringe pump with infusion and withdrawal mode. It can holds 1 syringe up to 60 mL with infusion rates from 0.008 nL/hr to 2545 µL/min. It is also available in two channel version (Model NE-4002X)
NE-1002X Programmable Microfluidics Single-Syringe Pump
Dimensions: 229 x 146 x 114 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: 1
Motor type: Step motor
Motor step per revolution: 400
Microstepping: 1/16 to 1/2 depending on motor speed
Advance per step: 4.252 nm to 34.018 nm depending on motor speed
Maximum speed: 2.24 mm/min
Minimum speed: 0.014 µm/min
Accuracy: ≤± 0,5 %
Flow rate: 0.007nL/hr to 2505 µL/min
Syringe size: 1 - 60 mL (140 mL partially filled)
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 1.63 Kg
Certificates: CE
NE-1002X
NE-4000 Dual-channel Syringe Pump
NE-4000 dual-channel syringe pump offers full-featured programmable capabilities with infusion and withdrawal mode.It is able to hold two syringes up to 60 mL with pumping rates from 25 µL/min to 100 mL/min. A 140 mL syringe can be filled up to 120 mL.
NE-4000 Dual-channel Syringe Pump
Dimensions: 229 x 146 x 114 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: 2
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.4252 µm to 1.7009 µm depending on motor speed
Maximum speed: 184 mm/min
Minimum speed: 1.3 µm/min
Linear force: > 400 N at minimum speed, 80 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 25 µL/min - 100 mL/min
Syringe size: 1 - 60 mL (140 mL partially filled)
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 1.63 Kg
Certificates: CE
NE-4000
NE-4002X Programmable 2 Channel Microfluidics Syringe Pump
NE-4002X is a fully programmable 2 channel syringe pump with infusion and withdrawal mode. It can holds 2 syringe up to 60 mL with infusion rates from 0.007 nL/hr to 1479 µL/min.
NE-4002X Programmable Microfluidics Dual-Channel Syringe Pump
Dimensions: 229 x 146 x 114 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: 2
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.4252 µm to 1.7009 µm depending on motor speed
Maximum speed: 184 mm/min
Minimum speed: 1.3 µm/min
Accuracy: ≤± 0,5 %
Flow rate: 0.007 nL/hr to 1480 µL/min
Syringe size: 1 - 60 mL (140 mL partially filled)
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 1.63 Kg
Certificates: CE
NE-4002X
NE-1600 Multi-channel (6) Syringe Pump
Multi-syringe pump with the same full-featured programmable capabilities as the NE-1000 (up to 6 channels with infusion/withdrawal). NE-1600 holds 2, 4 or 6 syringes of up to 60 mL each or 2 or 4 syringes up to 140 mL each with infusion rates from 0.008 µL/min to 40 mL/min.
NE-1600 Multi-channel (6) Syringe Pump
Dimensions: 260 x 381 x 127 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: up to 6
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.1323 µm to 0.5292 µm depending on motor speed
Maximum speed: 35 mm/min
Minimum speed: 0.4 µm/min
Linear force: > 700 N at minimum speed, 130 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 8 nL/min - 20 mL/min
Syringe size: 0.5 µL - 140 mL
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 4.6 Kg
Certificates: CE
NE-1600
NE-1800 Multi-channel (8) Syringe Pump
Multi-syringe pump with the same full-featured programmable capabilities as the NE-1000 (up to 8 channels). NE-1800 series allows infusion and withdrawal, and holds 2, 4, 6 or 8 syringes of up to 10 mL each with infusion rates from 0.008 µL/min to 5,7 mL/min.
NE-1800 Multi-channel (8) Syringe Pump
Dimensions: 260 x 381 x 127 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: up to 8
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.1323 µm to 0.5292 µm depending on motor speed
Maximum speed: 35 mm/min
Minimum speed: 0.4 µm/min
Linear force: > 700 N at minimum speed, 130 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 8 nL/min - 20 mL/min
Syringe size: 0.5 µL - 140 mL
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 4.6 Kg
Certificates: CE
NE-1800
NE-1200 Multi-channel (12) Syringe Pumps
Multi-syringe pump with the same full-featured programmable capabilities as the NE-1000 (up to 12 channels). NE-1200 series allow infusion and withdrawal, and holds 2, 4, 6, 8, 10 or 12 syringes of up to 3 mL each with infusion rates from 0.008 µL/min to 2.0 mL/min.
NE-1200 Multi-channel (12) Syringe Pumps
Dimensions: 260 x 381 x 127 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: up to 12
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.1323 µm to 0.5292 µm depending on motor speed
Maximum speed: 35 mm/min
Minimum speed: 0.4 µm/min
Linear force: > 700 N at minimum speed, 130 N at maximum speed
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 8 nL/min - 20 mL/min
Syringe size: 0.5 µL - 140 mL
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 4.6 Kg
Certificates: CE
NE-1200
NE-8000 High Pressure Programmable Single Syringe Pump
NE-8000 is a fully programmable stand-alone high pressure syringe pump with infusion and withdrawal mode. It holds 1 syringe up to 140 mLwith infusion rates from 1.733 µL/hr to 340.6 mL/min
Special Application: Continuous Infusion (Push-Pull) and Dual Syringe Pump
Using 2 NE-8000 pumps attached with a cable, one pump will infuse while the other pump refills or have simultaneous infusion.
NE-8000 High Pressure Programmable Single-Syringe Pump
Dimensions: 285 x 155 x 162 mm (L x W x H)
Working mode: Infusion/withdrawal
Channels: 1
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/1 depending on motor speed
Advance per step: 0.505 µm to 4.042 µm depending on motor speed
Maximum speed: 300.3 mm/min
Minimum speed: 1.66 µm/min
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 1.726 µL/hr to 247.40 mL/min
Syringe size: 0.5 µL - 140 mL
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Weight: 3.5 kg
Certificates: CE
NE-8000
dLSP-510 Digital Lab Single-Syringe Pump
High precision and stable fluid delivery single-channel digital pump, ideal for microfluidic, electrospinning, toxicology studies, capillary electrophoresis, neuroscience, etc. application.
dLSP-510 Digital Lab Single-Syringe Pump
Dimensions: 260 x185x180 mm (Dx W x H) drive unit, 190 mm x 123 mm x 33 mm (D x W x H) controller unit
Applications: Electrospinning, Microfluidics, Animal experiments, toxicology studies, Capillary electrophoresis, Drug Discovery, Cell Injections, Microcapsules, Catalyzer, Neuroscience, Organic Synthesis, Nutrition Science
Working mode: infusion, withdrawal, infusion/withdrawal, autorepeated, programming (on dedicated PC software)
Channels: 1
Motor type: Step motor
Microstepping: 1/64
Advance per step: 0.03255 µm / µstep
Maximum speed: 180 mm/min
Minimum speed: 0.0833 µm/min
Linear force: 40 lbs/18 kg (100% force selection)
Accuracy: ≤± 0,5 %
Flow rate: 0.0007 nL/ min (siringe 0.5 µL) - 120.044 mL /min (syringe 60 mL)
Syringe size: 0.5 µL - 60 mL
Comm. interface: USB-B, USB-A, Wifi, Bluetooth, Ethernet, etc
Display: 7 Inch, 1024x600, IPS HD LCD
Power supply: AC 100 V - 240 V-30 W 50/60 Hz
Operating temperature: 5 ºC - 40 º C
Humidity: < 85 %
Weight: 3.49 kg (drive unit), 0.37 kg (controller)
IP rate: IP31
Certificates: CE
LP-dLSP-510
dLSP- 520 Digital Lab Dual-Syringe Pump
High precision and stable fluid delivery dual-channel digital pump, ideal for microfluidic, electrospinning, toxicology studies, capillary electrophoresis, neuroscience, etc. application.
dLSP-520 Digital Lab Dual-Syringe Pump
Dimensions: Drive Unit: 260 mm x 185 mm x 180 mm (DxWxH), Control unit: 190mm x 123 mm x 33 mm (DxWxH)
Applications: Electrospinning, Microfluidics, Animal experiments, toxicology studies, Capillary electrophoresis, Drug Discovery, Cell Injections, Microcapsules, Catalyzer, Neuroscience, Organic Synthesis, Nutrition Science
Working mode: infusion, withdrawal, infusion/withdrawal, autorepeated, programming (on dedicated PC software)
Channels: 2
Motor type: Step motor
Microstepping: 1/64
Advance per step: 0.03255 µm/ µstep
Maximum speed: 180 mm/min
Minimum speed: 0.0833 µm/min
Linear force: 40 lbs/18 kg (100% force selection)
Accuracy: ≤± 0,5 %
Flow rate: 0.0007 nl/min (0.5 µL syringe) - 74-786 mL/min (30 mL syringe)
Syringe size: 0.5 µL - 30 mL
Comm. interface: USB-B, USB-A, Wifi, Bluetooth, Ethernet, etc
Display: 7 inch, 1024x600, ISP HD LCD
Power supply: AC 100V-240V/30 W 50/60Hz
Operating temperature: 5ºC - 40º C
Humidity: <85%
Weight: 3.49 kg (drive unit), 0.37 kg (controller)
IP rate: IP31
Certificates: CE
LP-dLSP-520
L100-1E Basic Single-channel Peristaltic Pump
Compact single-channel peristaltic pump with small-foot print for saving more space on your benchtop. Speed range is 0.1 - 100 rpm and flow rate range is 0.000166 – 32 mL/min. It is created for transferring, feed, sampling, or filling applications in laboratories and research settings. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1E Basic Single-channel Peristaltic Pump
Dimensions: 197 x 110 x 91 mm (L x W x H)
Channels: 1
Flow rate: 0.000166 - 32 mL/min
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Membrane keypad (start/stop, direction and speed)
Display: 3-digit LED display for current speed. 2 LED indicators for running direction
Power off memory: Return to previous state when power on
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 100-240V, 50/60Hz
Power consumption: 15W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 2.3 kg (without head)
IP rate: IP31
Certificates: CE
LP-L100-1E/DG-1(10)
L100-1E Basic Dual-channel Peristaltic Pump
Compact dual-channel peristaltic pump with small-foot print for saving more space on your benchtop. Speed range is 0.1 - 100 rpm and flow rate range is 0.000166 – 32 mL/min. It is created for transferring, feed, sampling, or filling applications in laboratories and research settings. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1E Basic Dual-channel Peristaltic Pump
Dimensions: 197 x 110 x 91 mm (L x W x H)
Channels: 2
Flow rate: 0.000166 - 32 mL/min
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Membrane keypad (start/stop, direction and speed)
Display: 3-digit LED display for current speed. 2 LED indicators for running direction
Power off memory: Return to previous state when power on
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 100-240V, 50/60Hz
Power consumption: 15W
Operating temperature: 0 to 40 ºC
Weight: 2.3 kg (without head)
IP rate: IP31
Certificates: CE
LP-L100-1E/DG-2(10)
L100-1S Standard Single-channel Peristaltic Pump
Standard single-channel peristaltic pump with precise speed control in 0.01 rpm resolution (10000:1 turndown ratio) and flow rate calibration function. The pump has more accurate and wider range of flow rate from 0.15 µL/min to 32 mL/min. Mainly designed for laboratory and light industry applications. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1S Standard Single-channel Peristaltic Pump
Dimensions: 232 x 142 x 149 mm (L x W x H)
Working mode: Speed control and flow rate mode
Channels: 1
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: RS485. Longer or Modbus protocol
Speed: 0.01 -100 rpm, CW/CCW
Speed precision: 0.01 rpm
Control mode: Membrane keypad, external signal and communication control
Display: LCD
Power off memory: Operating parameters will be saved automatically. The pump status when powered up could be set as stop or as the status before power loss
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 100-240V, 50/60Hz
Power consumption: 25W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 2.38 Kg
IP rate: IP31
Certificates: CE
LP-L100-1S/DG-1(10)
L100-1S Standard Dual-channel Peristaltic Pump
Standard dual-channel peristaltic pump with precise speed control in 0.01 rpm resolution (10000:1 turndown ratio) and flow rate calibration function. The pump has more accurate and wider range of flow rate from 0.15 µL/min to 32 mL/min. Mainly designed for laboratory and light industry applications. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1S Standard Dual-channel Peristaltic Pump
Dimensions: 232 x 142 x 149 mm (L x W x H)
Working mode: Speed control and flow rate mode
Channels: 2
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: RS485. Longer or Modbus protocol
Speed: 0.01 -100 rpm, CW/CCW
Speed precision: 0.01 rpm
Control mode: Membrane keypad, external signal and communication control
Display: LCD
Power off memory: Operating parameters will be saved automatically. The pump status when powered up could be set as stop or as the status before power loss
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 100-240V, 50/60Hz
Power consumption: 25W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 2.38 Kg
IP rate: IP31
Certificates: CE
LP-L100-1S/DG-2(10)
L100-1S Standard Multi-channel (4) Peristaltic Pump
Standard 4-channels peristaltic pump with precise speed control in 0.01 rpm resolution (10000:1 turndown ratio) and flow rate calibration function. The pump has more accurate and wider range of flow rate from 0.15 µL/min to 32 mL/min. Mainly designed for laboratory and light industry applications. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1S Standard Multi-channel (4) Peristaltic Pump
Dimensions: 232 x 142 x 149 mm (L x W x H)
Working mode: Speed control and flow rate mode
Channels: 4
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: RS485. Longer or Modbus protocol
Speed: 0.01 -100 rpm, CW/CCW
Speed precision: 0.01 rpm
Control mode: Membrane keypad, external signal and communication control
Display: LCD
Power off memory: Operating parameters will be saved automatically. The pump status when powered up could be set as stop or as the status before power loss
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 100-240V, 50/60Hz
Power consumption: 25W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 2.38 Kg
IP rate: IP31
Certificates: CE
LP-L100-1S/DG-4(10)
L100-1F Intelligent Single-channel Peristaltic Pump
Smart single-channel peristaltic pump with 7' color display, full touch screen and intuitive graphic interface, provide easy-to-use operations. Powerful function and flexible configuration, make it easier to run multi-step complex programs. Suitable for laboratorial and industrial application. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1F Intelligent Single-channel Peristaltic Pump
Dimensions: 180 x 292 x 235 mm (L x W x H)
Working mode: Programming
Channels: 1
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: USB or RS485(RJ11). Modbus protocol
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Touch screen control, footswitch control, external signal control and communication control
Display: 7” 1024*600 color LCD
Power off memory: Pump can start running at desired time
External control signal: Start/stop control, direction control: voltage level signal or switch signal (dry contact)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220V±20% / AC 110V±20%, 50Hz/60Hz
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.0 Kg
IP rate: IP31
Certificates: CE
LP-L100-1F/DG-1(10)
L100-1F Intelligent Dual-channel Peristaltic Pump
Smart dual-channel peristaltic pump with 7' color display, full touch screen and intuitive graphic interface, provide easy-to-use operations. Powerful function and flexible configuration, make it easier to run multi-step complex programs. Suitable for laboratorial and industrial application. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1F Intelligent Dual-channel Peristaltic Pump
Dimensions: 180 x 292 x 235 mm (L x W x H)
Working mode: Programming
Channels: 2
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: USB or RS485(RJ11). Modbus protocol
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Touch screen control, footswitch control, external signal control and communication control
Display: 7” 1024*600 color LCD
Power off memory: Pump can start running at desired time
External control signal: Start/stop control, direction control: voltage level signal or switch signal (dry contact)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220V±20% / AC 110V±20%, 50Hz/60Hz
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.0 Kg
IP rate: IP31
Certificates: CE
LP-L100-1F/DG-2(10)
L100-1F Intelligent Multi-channel (4) Peristaltic Pump
Smart 4-channels peristaltic pump with 7' color display, full touch screen and intuitive graphic interface, provide easy-to-use operations. Powerful function and flexible configuration, make it easier to run multi-step complex programs. Suitable for laboratorial and industrial application. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1F Intelligent Multi-channel (4) Peristaltic Pump
Dimensions: 180 x 292 x 235 mm (L x W x H)
Working mode: Programming
Channels: 4
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: USB or RS485(RJ11). Modbus protocol
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Touch screen control, footswitch control, external signal control and communication control
Display: 7” 1024*600 color LCD
Power off memory: Pump can start running at desired time
External control signal: Start/stop control, direction control: voltage level signal or switch signal (dry contact)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220V±20% / AC 110V±20%, 50Hz/60Hz
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.0 Kg
IP rate: IP31
Certificates: CE
LP-L100-1F/DG-4(10)
L100-1FS Intelligent Single-channel Peristaltic Pump
Smart single-channel peristaltic pump with automatic identification of pump head and tubing, simplify the operation process and provide reliable guarantee for high-precision fluid transferring. Intuitive graphic interface and modular programming, quickly set up your own application process. Suitable for laboratorial and industrial application. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1FS Intelligent Single-channel Peristaltic Pump
Dimensions: 180 x 292 x 235 mm (L x W x H)
Working mode: Programming
Channels: 1
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: USB or RS485(RJ11). Modbus protocol
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Touch screen control, footswitch control, external signal control and communication control
Display: 7” 1024*600 color LCD
Power off memory: Pump can start running at desired time
External control signal: Start/stop control, direction control: voltage level signal or switch signal (dry contact)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220V±20% / AC 110V±20%, 50Hz/60Hz
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.0 Kg
IP rate: IP31
Certificates: CE
Details: Automatic identification of pump head and tubing.
LP-L100-1FS/DG-1(10)
L100-1FS Intelligent Dual-channel Peristaltic Pump
Smart dual-channel peristaltic pump with automatic identification of pump head and tubing, simplify the operation process and provide reliable guarantee for high-precision fluid transferring. Intuitive graphic interface and modular programming, quickly set up your own application process. Suitable for laboratorial and industrial application. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1FS Intelligent Dual-channel Peristaltic Pump
Dimensions: 180 x 292 x 235 mm (L x W x H)
Working mode: Programming
Channels: 2
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: USB or RS485(RJ11). Modbus protocol
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Touch screen control, footswitch control, external signal control and communication control
Display: 7” 1024*600 color LCD
Power off memory: Pump can start running at desired time
External control signal: Start/stop control, direction control: voltage level signal or switch signal (dry contact)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220V±20% / AC 110V±20%, 50Hz/60Hz
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.0 Kg
IP rate: IP31
Certificates: CE
Details: Automatic identification of pump head and tubing.
LP-L100-1FS/DG-2(10)
L100-1FS Intelligent Multi-channel (4) Peristaltic Pump
Smart 4-channels peristaltic pump with automatic identification of pump head and tubing, simplify the operation process and provide reliable guarantee for high-precision fluid transferring. Intuitive graphic interface and modular programming, quickly set up your own application process. Suitable for laboratorial and industrial application. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1FS Intelligent Multi-channel (4) Peristaltic Pump
Dimensions: 180 x 292 x 235 mm (L x W x H)
Working mode: Programming
Channels: 4
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: USB or RS485(RJ11). Modbus protocol
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Touch screen control, footswitch control, external signal control and communication control
Display: 7” 1024*600 color LCD
Power off memory: Pump can start running at desired time
External control signal: Start/stop control, direction control: voltage level signal or switch signal (dry contact)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220V±20% / AC 110V±20%, 50Hz/60Hz
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.0 Kg
IP rate: IP31
Certificates: CE
Details: Automatic identification of pump head and tubing.
LP-L100-1FS/DG-4(10)
BT100-3J Precise Single-channel Peristaltic Pump
Basic single-channel peristaltic pump. Low cost solution with an excellent performance for most lab applications with flow systems. Commonly used in laboratory applications providing flow rates from 0.0002 to 32 mL/min. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-3J Precise Single-channel Peristaltic Pump
Dimensions: 232 x 142 x 149 mm (L x W x H)
Channels: 1
Flow rate: 0.000166 - 32 mL/min
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Membrane keypad (start/stop, direction and speed)
Display: 3-digit LED display for current speed. 3 LED indicators for operating state
Power off memory: Return to previous state when power on
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 90V-260V
Power consumption: 30W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 2.3 kg (without head)
IP rate: IP31
Certificates: CE
LP-BT100-3J/DG-1(10)
BT100-3J Precise Dual-channel Peristaltic Pump
Basic peristaltic pump with 2-channels. Low cost solution with an excellent performance for most lab applications with flow systems. Commonly used in laboratory applications providing flow rates from 0.0002 to 32 mL/min. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-3J Precise Dual-channel Peristaltic Pump
Dimensions: 232 x 142 x 149 mm (L x W x H)
Channels: 2
Flow rate: 0.000166 - 32 mL/min
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Membrane keypad (start/stop, direction and speed)
Display: 3-digit LED display for current speed. 3 LED indicators for operating state
Power off memory: Return to previous state when power on
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 90V-260V
Power consumption: 30W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 2.3 kg (without head)
IP rate: IP31
Certificates: CE
LP-BT100-3J/DG-2(10)
BT100-1F Dispensing Single-channel Peristaltic Pump
Single-channel peristaltic pump with LCD display, which could display the parameters and running state. The pump offers flow rate from 0.0002 mL/min to 32 mL/min, and the dispensing volume is from 0.01 mL to 9,99 L. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1F Dispensing Single-channel Peristaltic Pump
Dimensions: 285 x 207 x 180 mm (L x W x H)
Working mode: Flow rate and dispensing mode
Channels: 1
Flow rate: 0.000166 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 90V-260V
Power consumption: 40W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 3.8 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1F/DG-1(10)
BT100-1F Dispensing Dual-channel Peristaltic Pump
Dual-channel peristaltic pump with LCD display, which could display the parameters and running state. The pump offers flow rate from 0.0002 mL/min to 32 mL/min, and the dispensing volume is from 0.01 mL to 9,99 L. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1F Dispensing Dual-channel Peristaltic Pump
Dimensions: 285 x 207 x 180 mm (L x W x H)
Working mode: Flow rate and dispensing mode
Channels: 2
Flow rate: 0.000166 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 90V-260V
Power consumption: 40W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 3.8 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1F/DG-2(10)
BT100-1F Dispensing Multi-channel (4) Peristaltic Pump
4-channels peristaltic pump with LCD display, which could display the parameters and running state. The pump offers flow rate from 0.0002 mL/min to 32 mL/min, and the dispensing volume is from 0.01 mL to 9,99 L. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1F Dispensing Multi-channel (4) Peristaltic Pump
Dimensions: 285 x 207 x 180 mm (L x W x H)
Working mode: Flow rate and dispensing mode
Channels: 4
Flow rate: 0.000166 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 90V-260V
Power consumption: 40W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 3.8 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1F/DG-4(10)
BT100-1L Multi-channel (4) Peristaltic Pump
Flow rate 4-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (4) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 4
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-4(10)
BT100-1L Multi-channel (6) Peristaltic Pump
Flow rate 6-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (6) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 6
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-6(10)
BT100-1L Multi-channel (8) Peristaltic Pump
Flow rate 8-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (8) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 8
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-8(10)
BT100-1L Multi-channel (12) Peristaltic Pump
Flow rate 12-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (12) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 12
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-12(10)
BT100-1L Multi-channel (16) Peristaltic Pump
Flow rate 16-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (16) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 16
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-8(10)*2
BT100-1L Multi-channel (24) Peristaltic Pump
Flow rate 24-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (24) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 24
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop control, direction control: voltage level signal or switch signal (dry contact)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-12(10)*2
LSP01-3A Single-channel Syringe Pump
Just infusion single-channel syringe pump with 5 µm/min minimum linear speed. The acceptable syringe specification is from 10 μL to 60 mL Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
LSP01-3A Single-channel Syringe Pump
Dimensions: 280 x 210 x 140 mm (D x W x H)
Working mode: Infusion
Channels: 1
Advance per step: 0.156 µm
Linear force: > 90 N
Accuracy: ≤ ± 0.5% error in the condition of > 30% of max. infusion distance
Flow rate: 0.83 nL/min – 54.2 mL/min
Syringe size: 10 µL – 60 mL
Comm. interface: RS485
Pump stroke: 140 mm
Max. linear rate: 65 mm/min
Min. linear rate: 5 µm/min
State signal output: 2 output signals (OC gate signal) to indicate start/stop and direction
Control signal input: Falling edge or TLL signal to control start/stop
Display: Display volume, flow rate or linear speed (128x64 graphic LCD)
Power off memory: Storing the running parameters automatically
Power supply: AC 90V-260V / 15W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 3.6 Kg
Certificates: CE, EMC, ESD ≥ Level IV (IEC 61000-4-2)
LSP01-3A
LSP01-2A Single-channel Syringe Pump
Just infusion high-precision single-channel syringe pump with 1 µm/min minimum linear speed. The acceptable syringe specification is from 10 μL to 60 mL. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
LSP01-2A Single-channel Syringe Pump
Dimensions: 280 x 210 x 140 mm (D x W x H)
Working mode: Infusion
Channels: 1
Advance per step: 0.031 µm
Linear force: > 90 N
Accuracy: ≤ ± 0.5% error in the condition of > 30% of max. infusion distance
Flow rate: 0.16 nL/min – 10.8 mL/min
Syringe size: 10 µL – 60 mL
Comm. interface: RS485
Pump stroke: 140 mm
Max. linear rate: 13 mm/min
Min. linear rate: 1 µm/min
State signal output: 2 output signals (OC gate signal) to indicate start/stop and direction
Control signal input: Falling edge or TLL signal to control start/stop
Display: Display volume, flow rate or linear speed (128x64 graphic LCD)
Power off memory: Storing the running parameters automatically
Power supply: AC 90V-260V / 15W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 3.6 Kg
Certificates: CE
LSP01-2A
LSP02-2B Dual-channel Syringe Pump
2-channels syringe pump with infusion/ withdrawal mode. The acceptable syringe specification is from 10 µL to 140 mL. Suitable for high accuracy and small flow rate liquid transferring. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
LSP02-2B Dual-channel Syringe Pump
Dimensions: 280 x 250 x 140 mm (D x W x H)
Working mode: Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion, continuous
Channels: 2
Advance per step: 0.156 µm
Linear force: > 180 N
Accuracy: ≤ ± 0.5% error in the condition of > 30% of max. infusion distance
Flow rate: 0.83 nL/min – 150.5 mL/min
Syringe size: 10 µL – 140 mL
Comm. interface: RS485
Pump stroke: 140 mm
Max. linear rate: 130 mm/min
Min. linear rate: 5 µm/min
State signal output: 2 output signals (OC gate signal) to indicate start/stop and direction
Control signal input: Falling edge or TLL signal to control start/stop
Display: Display volume, flow rate or linear speed (128x64 graphic LCD)
Power off memory: Storing the running parameters automatically
Power supply: AC 90V-260V / 20W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 4.3 Kg
Certificates: CE, EMC, ESD ≥ Level IV (IEC 61000-4-2)
LSP02-2B
TJ-3A Single-channel Syringe Pump
Infusion/withdrawal single-channel syringe pump. The acceptable syringe specifications are from 10 µL to 60 mL. Suitable for high accuracy and small flow rate liquid transferring. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
TJ-3A Single-channel Syringe Pump
Dimensions: 170 x 108 x 70 mm / 245 x 100 x 95 mm (controller / drive unit) (D X W X H)
Working mode: Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion, continuous
Channels: 1
Advance per step: 0.165 µm
Linear force: > 90 N
Accuracy: ≤ ± 0.5% error in the condition of > 30% of max. infusion distance
Flow rate: 0.139 µL/min – 52.9 mL/min
Syringe size: 1 - 60 mL
Comm. interface: RS485
Pump stroke: 90 mm
Max. linear rate: 79.4 mm/min
Min. linear rate: 7.9 µm/min
State signal output: 2 output signals (OC gate signal) to indicate start/stop and direction
Control signal input: Falling edge or TLL signal to control start/stop
Display: Display volume, flow rate or linear speed (128x64 graphic LCD)
Power off memory: Storing the running parameters automatically
Power supply: AC 90V-260V / 10W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 0.8 Kg (controller) 1.3 Kg (drive unit)
Certificates: CE
TJ-3A/W0109-1B
ECStat Electrochemical Station
USB-powered All-in-One Electrochemical Workstation, including a Bipotentiostat / Galvonostat with built-in Impedance Analyzer, in a very compact and portable equipment. USB interfacing and fully controlled by MicruX EC Manager PC software. More than 25 electroanalytical techniques. Compatible with electrochemical platforms, thick-film and thin-film electrodes.
ECStat Electrochemical Station
Dimensions: 160 x 100 x 45 mm (L x W x H)
Operating modes: bipotentiostat, potentiostat, ZRA, galvanostat, PEIS analyzer
LED indicators: power on, cell on
Comm. interface: USB-C
Power supply: USB
Operating temperature: 0 ºC to +50 ºC
DC-potential range: ± 10 V
Compliance voltage: ± 10 V
DC-potential resolution: 75 µV
Applied potential accuracy: ≤ 0.1% ± 1 mV offset
Current ranges: 100 pA to 10 mA (9 ranges)
Maximun DC current: ± 30 mA
Current accuracy: ≤ 0.1 % (at Full Scale Range)
Measured current resolution: 0.006 % of current range (5 fA on 100 pA range)
EIS - Frequency range: 10 μHz to 1 MHz
EIS - AC-amplitude range: 1 mV to 250 mV rms, or 0.6 V p-p
Housing: Aluminum case
Weight: < 0.5 Kg
Certificates: CE
Details: MicruX ECStat is provided in a plastic briefcase with all the accessories and software for interfacing with the computer and sensors.
ECSTAT
ECSens BIPOT Electrochemical Sensing Interface
New ultra-compact and affordable bipotentiostat, ideal for starting electrochemical studies with the most common electroanalytical techniques, enabling in-situ voltammetric and amperometric analyses. USB interfacing and fully controlled by MicruX EC Manager Lite software with multiplexing capabilities. Compatible with single and dual screen-printed electrodes.
ECSens BIPOT Electrochemical Sensing Interface
Dimensions: 39 x 17 x 9 mm (L x W x H)
Operating modes: Bipotentiostat / potentiostat (multi-channel mode available)
LED indicators: power on, cell on
Comm. interface: USB-C
Power supply: USB
Operating temperature: 0 ºC to +50 ºC
DC-potential range: ± 1.5 V
Compliance voltage: 2.65 V
DC-potential resolution: 250 µV
Applied potential accuracy: ≤ 0.1%
Current ranges: 0.25 µA to 12.5 mA (5 ranges)
Maximun DC current: ± 5 mA
Current accuracy: ≤ 0.1 % (at Full Scale Range)
Measured current resolution: 0.002% of current range (5 pA on 0.25 µA range)
Housing: Aluminum case
Weight: < 5 g
Certificates: CE
Details: MicruX ECSens BIPOT is provided with all the accessories and software for interfacing with the computer and sensors.
ECSENS104/BIPOT
ECSens Electrochemical Sensing Interface
Entry-level ultra-compact and afforable potentiostat for initial electrochemical studies with the most common electroanalytical techniques, enabling a true on-site voltammetric and amperometric analysis. USB interfacing and fully controlled by MicruX EC Manager Lite software with multiplexing capabilities. Compatible with thick-film single-electrodes.
ECSens Electrochemical Sensing Interface
Dimensions: 36 x 15 x 8 mm (L x W x H)
Operating modes: Potentiostat (multi-channel mode available)
LED indicators: power on, cell on
Comm. interface: USB-C
Power supply: USB
Operating temperature: 0 ºC to +50 ºC
DC-potential range: ± 1.08 V
Compliance voltage: 2 V
DC-potential resolution: 250 µV
Applied potential accuracy: ≤ 0.1%
Current ranges: 6.5 µA to 0.75 mA (7 ranges)
Maximun DC current: ± 0.75 mA
Current accuracy: ≤ 0.1 % (at Full Scale Range)
Measured current resolution: 0.002 % of current range (130 pA on 6.5 µA range)
Housing: Aluminum case
Weight: < 5 g
Certificates: CE
Details: MicruX ECSens is provided with an electrode pack (S1PE) as well as all the accessories and software for interfacing with the computer and sensors.
ECSENS100
54 Products. View all
Delivery
We ship the products under strict security measures, ensuring their protection...
More information
- Mora-Garay Industrial Park · Building #6 · Juan de la Cierva, 2C, 33211 Gijón (Asturias), Spain
- Phone/Fax: (+34) 984 151 019
- Email: info@micruxfluidic.com
- Web: www.micruxfluidic.com
Contact
MICRUX® - All rights reserved - 2024