Shop
AIO cell Add-on - Thin Layer PEEK-1.0
Organic solvent compatibility. Enable the use of microfluidic electrochemical sensors in a thin-layer (TL) based flow approach. Improves the control of fluids. Better precision with low dead volume and low sample volume. Compatible with TL-SE and TL-IDA thin-layer microfluidic sensors.
AIO cell Add-on - Thin Layer PEEK-1.0
Material: PEEK
Channel volume: 55 nL
Applications: Organic solvents resistance
Contents: 1 x TL-PEEK-1,0 Add-on
Details: The add-on is joined to the base-cell (AIO) by means of magnets. ompatible with TL-SE1, TL-IDA1 & TL-IDA5.
ED-AIO-ADD-ON-TL-PEEK-1.0
LSP01-2A Single-channel Syringe Pump
Just infusion high-precision single-channel syringe pump with 1 µm/min minimum linear speed. The acceptable syringe specification is from 10 μL to 60 mL. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
LSP01-2A Single-channel Syringe Pump
Dimensions: 280 x 210 x 140 mm (D x W x H)
Working mode: Infusion
Channels: 1
Advance per step: 0.031 µm
Linear force: > 90 N
Accuracy: ≤ ± 0.5% error in the condition of > 30% of max. infusion distance
Flow rate: 0.16 nL/min – 10.8 mL/min
Syringe size: 10 µL – 60 mL
Comm. interface: RS485
Pump stroke: 140 mm
Max. linear rate: 13 mm/min
Min. linear rate: 1 µm/min
State signal output: 2 output signals (OC gate signal) to indicate start/stop and direction
Control signal input: Falling edge or TLL signal to control start/stop
Display: Display volume, flow rate or linear speed (128x64 graphic LCD)
Power off memory: Storing the running parameters automatically
Power supply: AC 90V-260V / 15W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 3.6 Kg
Certificates: CE
LSP01-2A
TJ-3A Single-channel Syringe Pump
Infusion/withdrawal single-channel syringe pump. The acceptable syringe specifications are from 10 µL to 60 mL. Suitable for high accuracy and small flow rate liquid transferring. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
TJ-3A Single-channel Syringe Pump
Dimensions: 170 x 108 x 70 mm / 245 x 100 x 95 mm (controller / drive unit) (D X W X H)
Working mode: Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion, continuous
Channels: 1
Advance per step: 0.165 µm
Linear force: > 90 N
Accuracy: ≤ ± 0.5% error in the condition of > 30% of max. infusion distance
Flow rate: 0.139 µL/min – 52.9 mL/min
Syringe size: 1 - 60 mL
Comm. interface: RS485
Pump stroke: 90 mm
Max. linear rate: 79.4 mm/min
Min. linear rate: 7.9 µm/min
State signal output: 2 output signals (OC gate signal) to indicate start/stop and direction
Control signal input: Falling edge or TLL signal to control start/stop
Display: Display volume, flow rate or linear speed (128x64 graphic LCD)
Power off memory: Storing the running parameters automatically
Power supply: AC 90V-260V / 10W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 0.8 Kg (controller) 1.3 Kg (drive unit)
Certificates: CE
TJ-3A/W0109-1B
Flow System - Basic Pack
The basic pack includes:
- Fitting nuts (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
- Ferrules PTFE/SS (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
- PTFE tubing (OD: 1,6mm - 1/16" - ID: 0,8 mm) - 1 m
- Plastic syringes (10 mL) - 5 units
- Disposable scalpel - 1 unit
Flow System - Basic Pack
Contents: Fitting nuts + ferrules + tubing + syringes + scalpel
Details: Other pack options are available under request.
B-PACK
Flow System - Basic-Plus Pack
The plus-pack includes:
- Fitting nuts (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
- Ferrules PTFE/SS (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
- PTFE tubing (OD: 1,6mm - 1/16" - ID: 0,8 mm) - 1 m
- Glass reservoir (GL32 thread - 50 mL) with standard cap - 2 units
- Bottle cap (GL32 thread/ 2 x Luer ports) - 2 units
- Plastic syringes (10 mL) - 5 units
- Disposable scalpel - 1 unit
Flow System - Basic-Plus Pack
Contents: Fitting nuts + ferrules + tubing + reservoirs + syringes + scalpel
Details: Other pack options are available under request.
B-PACK+
Standalone Desktop LCD Digital Microscope
Up to 1200x magnified and LED Illuminated viewing. Perfect complement for a wide range of applications such as inspection of electronics, microfluidic channels, electrodes, etc. Compatible with PC, MAC and iPad.
Standalone Desktop LCD Digital Microscope
Dimensions: 22.9 x 15.2 x 15.2 cm
Image sensor: 5 MegaPixel (up to 12M by interpolation)
Focus range: Manual focus from 10mm to 30mm
Light source: 8 LEDS with adjustable brightness
Digital magnification: Up to 1200x
Optical magnification: 10x to 300x
Battery power: Rechargeable 1050 mAh Li-ion Battery
Working time: 2 hours
Charge time: 3 hours
Software compatibility: Windows XP SP2/Vista/7/8/10 and Mac 10.6-10.8
Video format: AVI
Video capture resolution: VGA, QVGA - 30 fps
Software languages: English, German, French, Spanish, Russian, Italian, Portuguese, Dutch, Polish, Japanese, Korean, Chinese
On screen display languages: English, German, French, Spanish, Italian, Portuguese, Dutch, Japanese, Chinese Simplified, Chinese Traditional
LCD screen: 3.5" LCD screen, 4:3 ratio, resolution 320x240 pixels
microSD card capacity: Up to 32GB microSDHC
TV output: Yes
Weight: 0.9 Kg
Certificates: CE, FCC approval, RoHS compliance
Controller: High speed DSP
Flicker rate: 50Hz/60Hz
SDM-1200x-LCD
Flow System - Full Pack
The full-pack contains all the accesories for using using MicruX’ thin-film (micro)electrodes in flow systems with All-in-One platform. This pack includes:
- AIO-CELL-1x + 25 standard electrodes.
- Peristaltic pump and injection valve.
- Fittings, ferrules and tubing.
- Glass reservoir and other material.
Flow System - Full Pack
Contents: AIO Cell + 1 Add-on + 25 standard thin-film electrodes + fitting system + reservoir + other accessories
Details: Other pack options; with different peristaltic or syringe pumps, accessories…, are also available on demand. Packs might be customized taking into account the specific requirements of customers.
F-PACK-AIO
iHVStat Electrophoresis System
Integrated, automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.
iHVStat Electrophoresis System
Dimensions: 165 x 150 x 95 mm (L x W x H)
Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)
LED indicators: power, Bluetooth, cable
Battery power: LiPo - 3300 mAh
HV channels/outputs: 1/4
HV outputs polarity: Positive / negative
HV Output Voltage: ± 3000 V
HV Max. Output Current: 0.34 mA
DC-potential range: ± 2.00 V
DC-potential resolution: 1 mV
DC-offset error: ± 1 mV
Accuracy: < 0.1%
Current ranges: 1 nA to 1 μA (4 ranges)
Maximun DC current: ± 2 μA
Weight: < 0.5 Kg
Certificates: CE
Details: PC software control - MicruX Manager. Integrated interface for microfluidic chip holder. Cabeless.
iHVSTAT
iHVStat Electrophoresis System
Integrated, automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.
iHVStat Electrophoresis System
Dimensions: 165 x 150 x 95 mm (L x W x H)
Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)
LED indicators: power, Bluetooth, cable
Battery power: LiPo - 3300 mAh
HV channels/outputs: 1/4
HV outputs polarity: Positive / negative
HV Output Voltage: ± 3000 V
HV Max. Output Current: 0.34 mA
DC-potential range: ± 2.00 V
DC-potential resolution: 1 mV
DC-offset error: ± 1 mV
Accuracy: < 0.1%
Current ranges: 1 nA to 1 μA (4 ranges)
Maximun DC current: ± 2 μA
Weight: < 0.5 Kg
Certificates: CE
Details: PC software control - MicruX Manager. Integrated interface for microfluidic chip holder. Cabeless.
iHVSTAT
HVStat Electrophoresis System
Automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.
HVStat Electrophoresis System
Dimensions: 165 x 150 x 85 mm (L x W x H)
Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)
LED indicators: power, Bluetooth, cable
Battery power: LiPo - 3300 mAh
HV channels/outputs: 1/4
HV outputs polarity: Positive / negative
HV Output Voltage: ± 3000 V
HV Max. Output Current: 0.34 mA
DC-potential range: ± 2.00 V
DC-potential resolution: 1 mV
DC-offset error: ± 1 mV
Accuracy: < 0.1%
Current ranges: 1 nA to 1 μA (4 ranges)
Maximun DC current: ± 2 μA
Weight: < 0.5 Kg
Certificates: CE
Details: PC software control - MicruX Manager. External cables for interfacing microfluidic chip holder.
HVSTAT
HVStat Electrophoresis System
Automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.
HVStat Electrophoresis System
Dimensions: 165 x 150 x 85 mm (L x W x H)
Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)
LED indicators: power, Bluetooth, cable
Battery power: LiPo - 3300 mAh
HV channels/outputs: 1/4
HV outputs polarity: Positive / negative
HV Output Voltage: ± 3000 V
HV Max. Output Current: 0.34 mA
DC-potential range: ± 2.00 V
DC-potential resolution: 1 mV
DC-offset error: ± 1 mV
Accuracy: < 0.1%
Current ranges: 1 nA to 1 μA (4 ranges)
Maximun DC current: ± 2 μA
Weight: < 0.5 Kg
Certificates: CE
Details: PC software control - MicruX Manager. External cables for interfacing microfluidic chip holder.
HVSTAT
Microfluidic Chip Holder
Basic interface for microchips electrophoresis integrating electrode connections for detection and HV as well as wells for buffer solution, sample waste and detection. Compatible with microfluidic electrophoresis chips, HVStat and iHVStat instruments.
Microfluidic Chip Holder
Material: PMMA
Dimensions: 100 x 65 x 15 mm (L x W x H)
Applications: Electrophoretic separations of organic compounds, cations, anions, DNA, peptides, etc.
Contents: Microfluidic Chip Interface
Details: Integrated wells, HV electrodes, 2-mm female bananas. Reusable.
MCE-HOLDER-DC02
129 Products. View all
Delivery
We ship the products under strict security measures, ensuring their protection...
More information
- Mora-Garay Industrial Park · Building #6 · Juan de la Cierva, 2C, 33211 Gijón (Asturias), Spain
- Phone/Fax: (+34) 984 151 019
- Email: info@micruxfluidic.com
- Web: www.micruxfluidic.com
Contact
MICRUX® - All rights reserved - 2024