Shop
BT100-1F Dispensing Dual-channel Peristaltic Pump
Dual-channel peristaltic pump with LCD display, which could display the parameters and running state. The pump offers flow rate from 0.0002 mL/min to 32 mL/min, and the dispensing volume is from 0.01 mL to 9,99 L. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1F Dispensing Dual-channel Peristaltic Pump
Dimensions: 285 x 207 x 180 mm (L x W x H)
Working mode: Flow rate and dispensing mode
Channels: 2
Flow rate: 0.000166 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 90V-260V
Power consumption: 40W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 3.8 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1F/DG-2(10)
BT100-1F Dispensing Multi-channel (4) Peristaltic Pump
4-channels peristaltic pump with LCD display, which could display the parameters and running state. The pump offers flow rate from 0.0002 mL/min to 32 mL/min, and the dispensing volume is from 0.01 mL to 9,99 L. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1F Dispensing Multi-channel (4) Peristaltic Pump
Dimensions: 285 x 207 x 180 mm (L x W x H)
Working mode: Flow rate and dispensing mode
Channels: 4
Flow rate: 0.000166 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 90V-260V
Power consumption: 40W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 3.8 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1F/DG-4(10)
BT100-1F Dispensing Single-channel Peristaltic Pump
Single-channel peristaltic pump with LCD display, which could display the parameters and running state. The pump offers flow rate from 0.0002 mL/min to 32 mL/min, and the dispensing volume is from 0.01 mL to 9,99 L. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1F Dispensing Single-channel Peristaltic Pump
Dimensions: 285 x 207 x 180 mm (L x W x H)
Working mode: Flow rate and dispensing mode
Channels: 1
Flow rate: 0.000166 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 90V-260V
Power consumption: 40W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 3.8 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1F/DG-1(10)
BT100-1L Multi-channel (16) Peristaltic Pump
Flow rate 16-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (16) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 16
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-8(10)*2
BT100-1L Multi-channel (12) Peristaltic Pump
Flow rate 12-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (12) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 12
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-12(10)
BT100-1L Multi-channel (6) Peristaltic Pump
Flow rate 6-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (6) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 6
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-6(10)
BT100-1L Multi-channel (4) Peristaltic Pump
Flow rate 4-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (4) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 4
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-4(10)
BT100-1L Multi-channel (8) Peristaltic Pump
Flow rate 8-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (8) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 8
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-8(10)
BT100-1L Multi-channel (24) Peristaltic Pump
Flow rate 24-channels peristaltic pump with graphic LCD, which could display the parameters and running state. The high output torque could drive up to 24 channels. The pump provides flow rates from 0.002 mL/min to 32 mL/min. The running parameters are saved automatically and the pump could be operated easily. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
BT100-1L Multi-channel (24) Peristaltic Pump
Dimensions: 202 × 160 × 239 mm (L x W x H)
Channels: 24
Flow rate: 0.002 - 32 mL/min
Comm. interface: RS485
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Control panel, external signal and communication control
Display: 128 × 64 graphic LCD
Power off memory: Return to previous state when power on
External control signal: Start/stop control, direction control: voltage level signal or switch signal (dry contact)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 220 V ± 10% 50/60 Hz (standard) or AC 110 V ± 10% 50/60 Hz (optional)
Power consumption: 50W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 5.3 Kg
IP rate: IP31
Certificates: CE
LP-BT100-1L/DG-12(10)*2
AIO-SPE cell Add-on - Flow Cell PMMA
Wall-jet flow-cell add-on for standard thick-film electrodes. Ideal for integrating a EC detection system in flowing liquids such as FIA, HPLC, CE... Low dead volume and sample requirements. Compatible with screen-printed electrodes S1PE.
AIO-SPE cell Add-on - Flow Cell PMMA
Material: PMMA
Electrochemical cell: up to 8 mm Ø
Contents: 1 x FC-PMMA Add-on / 2 x O-rings
Details: The add-on is joined to the base-cell (AIO-SPE) by means of magnets. Compatible with standard screen-printed elctrodes.
ED-AIO-SPE-ADD-ON-FC-PMMA
AIO-SPE cell Add-on - Batch Cell PMMA
Enables the use of the standard thick-film electrodes in applications where larger sample volumen are required (up to 1 mL). Compatible with screen-printed electrodes S1PE and EEP platform.
AIO-SPE cell Add-on - Batch Cell PMMA
Material: PMMA
Electrochemical cell: up to 8 mm Ø
Sample volume: up to 1 mL
Contents: 1 x BC-PMMA Add-on / 2 x O-rings
Details: The add-on is joined to the AIO support by means of magnets. Compatible with standard printed electrodes.
ED-AIO-SPE-ADD-ON-BC-PMMA
CABLE connector for thin-film IDE electrodes
IDE-CABLE connector provides an interface between the thin-film IDµElectrodes (IDE - two contact pads) and the potentiostat, enabling the use of microvolume (2 – 10 µL sample drops) or dipping into a solution.
CABLE connector for thin-film IDE electrodes
Dimensions: 50 cm long
Contents: 1 x IDE cable (with 2-mm male or female ends to be selected)
Details: Accessory for thin-film InterDigitated Electrodes (IDE)
ED-IDE-CABLE
129 Products. View all
Delivery
We ship the products under strict security measures, ensuring their protection...
More information
- Mora-Garay Industrial Park · Building #6 · Juan de la Cierva, 2C, 33211 Gijón (Asturias), Spain
- Phone/Fax: (+34) 984 151 019
- Email: info@micruxfluidic.com
- Web: www.micruxfluidic.com
Contact
MICRUX® - All rights reserved - 2024